Atex Global atexultrasonictesters.com

Contact Sales

please contact our sales team for info, prices and availablity.
+44 (0)800 7565305
Office hours 8am - 8pm, mon - fri sales@atexglobal.com

atex tools

Contact Sales

0800 7565305 sales@atexglobal.com
 
     
 

Cordex UT5000 Atex Ultrasonic Tester

The UT5000 Intrinsically Safe Ultrasonic Tester with CorDEX CONNECTTM measures metal thickness for Non-Destructive Testing (NDT) and Predictive Maintenance (Pdm) on pipelines and fixed equipment within hazardous locations.

The CorDEX UT5000 is a next-generation tester packed with proven technologies: CorDEX CONNECT uses RFID + Software to tag measurements with their location then organizes the data, giving the engineer a view of the pipeline at any specific location; the unique corrosion mode option helps identify spots of thinning; MultiECHOTM technology improves accuracy on uneven surfaces; onboard memory stores up to 1000 readings.

Designed for rugged environments, the overmoulded body protects a 3.1 inch colour screen and has easy-to-feel raised buttons. The dual-element, 4MHz transducer is adjustable up to 10Hz with accuracy of +/- 0.05mm.

  • CorDEX CONNECT TM
  • Stores up to 1000 measurements
  • Full colour, backlit screen
  • Tested for Zone 1 IIC T4 hazardous areas

Corrosion Mode
Continuous, real time measurements are logged with Min-Max- Average thickness readings

MultiECHOTM Technology
Brackets four echoes before providing a reading, reducing intermittent readings caused by irregular echoes

Material Velocity Tables
Drop-down menus to select the proper material velocity

Cordex UT5000
CORDEX UT5000 - £P.O.A

is supplied with:

  • UT5000 Hard carry case
  • 1 x Probe
  • USB communication cable
  • Coupling gel
  • Battery pack
  • Wrist strap
Cordex UT5000 Specifications
Certification Tested for Zone 1 IIC T4 hazardous areas
No hot work permit necessary
Memory Stores up to 1000 measurements
Screen 3.1” RGB TFT colour screen with backlight Right/left handed set up
Material Velocity Selection Preloaded via Drop-Down menu, or user defined.
Transducer Dual Element
Pulse Rate Standard transmit pulse rate of 4Hz Adjustable from single shot up to 10Hz
Receiver Bandwidths 1MHz to 15MHz (-3dB points)
Frequency 4MHz, 3mm up to 100mm
Accuracy +/- 0.05mm
RFID Tag Reader • Operates with 13.54MHz passive tags
• Detection range up to 5cm
• Supports ISO/IEC 15693-2, ISO/IEC 18000-3 tag formatsn
Battery Details • Rechargeable lithium thionyl chloride primary 3.6V cell
• 100 hours continuous operation with back light restrictions low battery warning
Operating Temperature -10 to +50C